HyperSnapô Frequently Asked Questions|
For the old HyperSnap ver. 3.xx FAQ list please click here.
Installation, license and startup issues:
DVD or Video Screen Capture
HyperSnap v.6 needs a new license key, a different one from ver. 3 or 4 key. Our upgrades between the major version numbers (like 4 -> 5) require a purchase of a another license at a cost that is usually less than 50% of a new purchase.. Minor upgrades, like 5.42 to 5.63 are free.
To purchase the upgrade license, visit the Hyperionics Online Store.
The "registered" copy of HyperSnap is the same one that you use for evaluation. You only need to enter your license key into it to convert it to a fully functional copy. This method of selling has an advantage for you: if we release a newer version 5 (for example, you have version 5.01 and we release 5.10) you may upgrade for free by simply downloading the newer one and installing it over the old ver. 5.01. If we sent the full version on CDs, we would not be able to ship you a new CD with each program update. This free upgrade policy is valid for as long as HyperSnap version number is 4.something.
To enter HyperSnaplicense received by email, do this:
Every copy of HyperSnap I download is
corrupt, I can't install or...
Note: recently we have a report of a virus corrupting HyperSnap and HyperCam (and other programs), which is not detected by McAfee scanner. It is called "CIH Space Filler" or something similar. We were told that it can be detected with VET virus scanner from http://www.vet.com.au One user told us, that VET in fact detected and reported the virus correctly, but was unable to clean it up completely. He subsequently tried the latest version of Norton Anti-Virus product to clean it. We have no report if he did succeed or not.
Another virus recently reported and not detected by popular anti-virus programs is Win95.CIM. We are told that AntiViral Toolkit Pro (AVP) can detect and remove it. The Toolkit can be downloaded from http://www.avp.ch or http://www.avp.com .
Another report of anti-virus program to clean Win95/CIH virus:
Other possible causes of such behaviour would be a disk error (bad sector on a disk, or something). If you find out your system to be clean of viruses, run SCANDISK program (standard Windows 98 and 98 component) with a full surface scan to identify and mark out all bad sectors. When all of the above is done, download a fresh copy of HyperSnap, best from Hyperionics web site directly, and install.
HyperSnap ver. 6 and 7 setup program (normally named HS6Setup.exe or HS7Setup.exe) supports the following command line switches for silent installation:
-s silent installation to default directory.
-instdir d:\apps\hs installation to the specified directory, in this example to d:\apps\hs directory. Up to version 6.62.02 this directory must be created before running the setup, otherwise this option has no effect. Higher versions will create this directory if needed. Combine with "-s" switch for silent installation to the specified directory.
-runafter run HyperSnap program after installation is finished
-allusers install for all users (must be run under administrative account)
-autostart turn on automatic start of HyperSnap with Windows
-nodeskico do not install desktop icon.
To make HyperSnap always start (or
If you have a CD burner or other high capacity removable media in both computers, download and copy HyperSnap setup file (HS6Setup.exe) form this site to that disk, move to the non-networked computer and install from this CD/disk. Your license file may be transferred on the same disk or on a floppy.
If you later receive HyperSnap license key via email, simply copy that email text to a text file on a floppy disk, open the same file on the other computer and paste your key from there.
Hyperionics does not provide any Linux software at this time, nor do we support our software under Linux. However, here is an article from one of our customers, who successfully installed and run HyperSnap under Linux:
HyperSnap 3.64.02 and
Version 3.64.02 of HyperSnap has now been successfully run on my SuSE v8 Linux OS using Wine. Given that all the HyperSnap files (with the exception of any Windows "help.exe"? files) reside in the HyperSnap folder, the method outlined below should work on any distribution with Wine installed. My method to start HyperSnap has been to place a 'Wine link icon' on the KDE desktop. The required exe file is found using the KDE file manager and then dragged and dropped onto the Wine icon.
HyperSnap appears to run very well under Wine-Linux,although the "Help"? folders cannot be accessed correctly even when winhelp32.exe is copied to the HyperSnap folder. This is a minor nuisance because HyperSnap is extremely intuitive and almost self-explanatory. (I am aware Ksnapshot is available as a screen capture utility under KDE window manager, however I think that HyperSnap is preferable as it has far more options and provides better user flexibility.)
To get HyperSnap running under Linux, I used the method as outlined below, but I am sure others will find better ways of doing it.
1. The half meg compressed installation file for Hypersnap would not install correctly on top of Wine. The installation would start, but it would then shut down because it did not have permission to construct the necessary folder. This of course was because I was not working in superuser/root. I am sure a full installation with Wine would be possible and preferable, and this could be done by logging in as superuser/root before installation. However, I used an alternative option as outlined in step 2.
2. I also run Win4Lin, and HyperSnap installed perfectly in every respect in the Windows emulation system: unfortunately, Hypersnap is then restricted to the emulated Win98SE desktop and cannot "look outside" that region. Because I wanted Hypersnap to work in native Linux, I needed to have the HyperSnap files in the Linux work space. So, after installing and registering the software in the Win4Lin 98SE desktop, I next created a HySnapDX folder in my Home directory and then moved/copied the HyperSnap files from Win98SE across into the Linux directory.
3. The KDE file manager was then used to open up the HySnapDX folder and the icon of the hsdx.exe file was dragged and dropped onto the desktop Wine icon. The Wine wrapper window then appeared followed by the HyperSnap window.
Final Notes: I have not tested all aspects of the HyperSnap software as now running in the Wine-Linux situation, but preliminary results show that regional and Window screen captures are fully functional, as well as cropping after capture. One very interesting aspect is that although HyperSnap installed under Win4Lin cannot look across into Linux, the reverse is not true and HyperSnap under Wine-Linux can look across into Win98SE running under Win4Lin and capture anything in that OS desktop: a very, very nice side benefit. Provided later versions of HyperSnap continue to place all required operational exe, dll and auxillary files in the single HyperSnap folder, it is very likely that they also will run in the Wine-Linux desktop.
Running multiple instances (multiple windows) of HyperSnap
If you want to run two or more HyperSnap windows at the same time, you need to add -newwin command line parameter to the shortcut or desktop icon you use to start HyperSnap. Here is briefly how to do this:
- Right-click the shortcut and select "Properties" from the menu that appears.
- On the "Shortcut" tab of the window that just popped up, click into the "Target" field.
- Press the End key on the keyboard to move the text cursor to the very end of the text line there, do not change any text that precedes the cursor at this moment.
- Type one space, then type exactly this text: -newwin
- Click OK button.
From now on, each start of HyperSnap from that shortcut will open a new window (new instance) of HyperSnap.That's all.
This is usually an issue with certain security programs, trying to protect your privacy from screen captures in web browsers or similar programs, where you could be entering sensitive data like passwords, credit card numbers etc. Read comments from our users who encountered the problem in the past and our instructions below:
Note: Jan. 2013 - another user reported
an issue of HyperSnap capture hot keys being disabled when using Google Chrome
browser, despite having hot keys enabled in HyperSnap app itself. Upon further
investigation the user figured out the following:
Note: May 2011 - we're notified of another security product - Trusteer Rapport - that has a setting to disable all screen captures, effectively giving you all black instead of actual screen capture. This software is also offered by some banks to their customers to better secure the online banking operations. If you use Rapport product and need to make legitimate screen captures, please turn off the "disable screen captures" settings in it.
This is a problem noticed in August 2008. Apparently an Internet security product called ZoneAlarm ForceField or Extreme Security is trying to protect the users privacy from malware software by making screen captures impossible. It is controlled via a toolbar in Internet Explorer, FireFox, and possibly other browsers. If your Internet browser is running, even if its window is minimized, you will get only black screen captures. It is possible to turn off this protection, at least temporarily to make the screen captures you need, through ForceField toolbar in Explorer or FireFox - or if you need to capture from something else, not the browser, you could simply close completely all browser windows, which deactivates ForceField.
Here is how to fix the problem with ZoneAlarm:
Another reason for this problem may be a buggy graphics card driver, so if the above does not solve your problem, please check the web sites of your computer and graphics card manufacturers to see if they have any updates for your graphics hardware and your version of Windows.
If you have Spyware Doctor, activated its OnGuard feature and set Keylogger Guard to high, then enable "Special Capture"? in HyperSnap under Capture menu, you'll get a warning of a system-wide keyboard monitor in HyperSnap, and Spyware Doctor may shut down HyperSnap. There are 3 ways to work around this difficulty:
More information: Special Capture is for capturing computer games, that sometimes do not react to keys pressed like normal programs. HyperSnap installs a so called "system hook"? to detect when Print Screen or Scroll Lock key is pressed, which signals that the game operator requires a screen capture. Without it capturing screens from some games would not be possible. This keyboard hook is not "logging"? anything, it only sits and waits for the special capture hot keys pressed to tell HyperSnap to make a screen capture.
If you suddenly find out that your capture hot keys (such as Ctrl+Shift+R for "Region" capture, or whatever you customized them to be), or maybe works only when HyperSnap is the active, top level window - you probably disabled hot keys feature.
Enabled/disabled state is controlled by the "Enable Hot Keys" button in the
top toolbar, which looks like this:
How to make multiple captures without exiting
a game/other program to save or print them.
HyperSnap does not send any information from the user's machine to the Internet. It only reads a text file from Hyperionics web site, by default once every 7 days, to tell you if there is a new version of this program. You can change the frequency or disable this check under "Help/Check for a New Version" menu.
This error may happen if you have an old version of Windows and never installed Internet Explorer 4 or later. Your system may have an old version of Microsoft "Common Controls" DLL (comctl32.dll). You can update this DLL, without installing the latest IE - please download the following Microsoft updater:
then run it to install updated DLL, reboot your machine if/when prompted.
Most probably you are saving your images in JPEG format (.jpg). JPEG is a "lossy compression" format, designed mainly for real life photos, not for sharp screen capture images. It sacrifices some image quality to better compress graphics files, make them smaller on a disk and load faster over the Internet. If you must use JPEG for some reason, increase the "Quality Factor" setting on HyperSnap "Save As" window, to something like 90% or even 95%. The files will be bigger, but will look cleaner. Best, do not use JPEG files (or TIFF files with JPEG compression) at all. Instead, use either BMP format, which does not compress graphics, but preserves 100% quality, or PNG format, which does both good compression, and preserves 100% quality.
The options that automatically change captured images, are not remembered by default when you exit and restart HyperSnap. This is because in the past some users were setting them, forgetting about it, and complained that the program was broken when next it applied such crop or other operation automatically when they did not intend it.
You can still force HyperSnap to remember such "advanced" options, by adding -ra command line parameter to the icon (shortcut) you use to start HyperSnap. To add it, right-click the shortcut used to launch HyperSnap, select "Properties" from the menu that appears, then click into the "Target"? field and press the End key on the keyboard to move the text cursor to the very end of text in that box. Then type one space and -ra The whole text in that box should be similar to this:
It should not be modified in any way, except for adding a space and -ra at the end. Then click OK, and the next time you start HyperSnap from this shortcut and set any automatic image modification options, such as resize, crop, modifying colors, adding a stamp etc. HyperSnap will remember this even if you exit and restart the program.
Video playing on Windows machine, no matter if it comes from a movie file, Internet, VCD or DVD, can not be captured by regular screen capture methods, because it is usually playing in a hardware overlay. The overlay it almost as if there was another, smaller screen in front of your regular Windows desktop screen. The desktop contains in that place only the so called "overlay key color" - a solid block of color, usually black, blue, magenta or pink, but it can be anything.
A regular screen capture program will capture just that key color, which gives you a funny effect - if your movie is still playing, and your captured that key color into HyperSnap (or any other software) window, and you move that window so that it partly covers the movie player - you will see the movie through the part where this key color was. It seems as if your HyperSnap window had a "hole" and the movie shows through it. This is because the overlay hardware controller is programmed to display that movie everywhere where that key color is on the desktop.
How to deal with this problem? In some movie players (e.g. Windows Media Player, Real Player) you may disable "hardware acceleration" through their "settings" or "options" menu. This turns off the overlay use, the movie is played then normally, within Windows desktop and every screen capture program can get it.
Another way to turn off overlay use for video playback on most Windows XP system is to disable "hardware acceleration" of your graphics controller in the following way:
- right click empty Windows screen, select "Properties" from the menu
When finished with captures, you may want to restore "Hardware Acceleration"? back to what it was before.
We don't know of any way to disable video acceleration on Vista and Windows 7, but on most systems it's not necessary to disable it to capture regular video. BlueRay DVD disks on the other hand are protected from screen captures.
I won't be able to support proprietary pixel formats like this in HyperSnap. The hardware manufacturers keep their specifications secret and refuse to provide any info on how to decode the pictures from them - only their hardware controllers can do this.
The only thing I can advice you, is to check all the "Settings" and "Options" menus/buttons in your DVD player, and see if you can find some setting to disable "Hardware Acceleration", "Optimized Video" or similar option in it. Then you should be able to capture images (restore this setting again after finished with captures, for smoother playback in regular video watching).
If you DVD player does not have such setting, try another DVD player program.
For ATI DVD players, you may also try this:
You may be able to temporarily turn off proprietary ATI's pixel format (usually MCAM), by editing a registry entry. Please attempt to do this only if you are an advanced computer user, and confident that you can edit and restore registry entries. Note that this may or may not work, I'm not making any warranties:
Run RegEdit program and try to find the registry keys under:
HKEY_LOCAL_MACHINE\Software\Quadrant International, Inc.\Software Cinemaster\0.9\VideoDecoder
The 0.9 there was version number, there may be another, higher number now. If you find such key, try to look up "PerformanceClass" value. It defaults to 0x3 for the ATI version of this program, which uses the motion compensation hardware. Settings are 0-4, try using 4, then 0, 1 and 2, maybe something will work. You must completely exit and restart the ATI DVD player for a new setting to take place. Then follow HyperSnap DVD capture procedure.
Here is how to use auto-scroll capture:
For HyperSnap ver. 6.10 and newer:
For HyperSnap versions older than 6.10:
Note: Auto-Scroll does not work for all applications that have a vertical scroll bar. Some applications or web pages may have animated or non-scrolling parts, which prevent HyperSnap from correctly "stitching" captured bitmaps.
Note: there is no horizontal auto-scroll. If you have something to capture, that is WIDER than your screen, try first switching your machine into a higher resolution, e.g. 1280x1024 or higher. If that is not enough, capture the image in separate vertical strips, and assemble it into one bitmap with HyperSnap or other image editor - or use "Extended Active Window" capture on Windows XP or newer.
Some windows with a vertical scroll bars will not works with regular "auto-scroll window" command described above - e.g. the SAP accounting system windows probably will not auto-scroll - they are not standard Windows applications, but something weird ported from Unix... A "hidden" feature of HyperSnap called "auto-scroll region" may work for them.
To use this feature (although it's cumbersome), you have first to set it up: click "View/Customize" menu, then on "Commands" tab scroll the "Categories" window down until you see "Toolbar Only" and click it. Then grab "Auto-Scroll Region" in "Commands" panel, drag it out and to the top toolbar of HyperSnap, drop it somewhere there. Now you have this command on the toolbar, click "Close" in the "Customize" window.
To use "Auto-Scroll Region", click that new button. HyperSnap should hide now. Outline a region that is entirely inside one window (e.g. a SAP window) and does not contain outer, non-scrolling parts of that window, like it's frame. You need to click on 2 opposite corners to outline what to capture and scroll. Then you need a 3rd click: it must be exactly on the down pointing button of the vertical scroll bar of that window. Now HyperSnap will try to scroll and capture.
You may try this on any window as a test (even the one that works fine with normal window auto-scroll). Once you understood this, try SAP windows. They may or may not work, can't promise 100%, they are weird..
If you need a system-wide hot key for this function, you may set it starting with ver. 6.10.00, by using View/Customize menu, Keyboard tab - in Category find "Toolbar Only", highlight Auto-Scroll Region command and assign it any keyboard shortcut you want. It will also become a hot key now, and will be remembered as you exit and restart HyperSnap.
A screen capture program like HyperSnap can only capture images at the resolution the screen displays them. There are about 96 pixels per inch on a typical monitor, and that's what you get on your screen captured images. To make resolution higher HyperSnap would have to somehow invent and insert dots in-between screen pixels - nothing that would really give you good results.
When you set the image resolution under "Image/Change Resolution" menu, you only tell other programs or printers how dense to display or print existing pixels of the bitmap. Let's say you captured something 3 inches wide and it is 96 dpi originally. Now if you change the resolution value of this bitmap to 300 dpi and print it, you will get an image only about 1 inch wide - becase the existing dots are printed denser.
Additionally, not all image file formats can save resolution value to a file. BMP, JPEG, PNG can save it, but GIF format was defined without a field to save this value. So if you change resolution in HyperSnap for any given image, then save it as GIF and read back - it will revert to a default of 96 dpi.
More information: How to save a screen captured image in 300 dpi and have it printed at the same size as original? It is possible, even though you will not see any better quality or more detail on such image. Simply use Image/Scale menu in HyperSnap to make the image 3 times bigger (scale factor 300%), then set under Image/Resolution the value of 300 dpi. Save the image into a graphics format that does support dpi value saving, like BMP, PNG or high-quality JPEG. Now when you print this picture from HyperSnap or other graphics format, it will still have the original size on paper. This may be needed only in some special applications that absolutely require the resolution value set to 300 dpi for some strange reason...
Important: use HyperSnap ver. 4.01.02 or later for the examples listed below.
You may use Windows command line language and HyperSnap command line options. To convert just one file, let's say it's named snap.bmp, into snap.jpg you could type on the command line (MS-DOS or Command Prompt window):
"C:\Program Files\HyperSnap 4\HprSnap" -open snap.bmp -save:jpg snap
Note the in he above command, the "C:\Program Files\HyperSnap 4" part should be replaced with the actual path to the folder where you copy of HyperSnap 4 (HprSnap.exe) is located.
The above will convert just one file, so it's not a big deal - you could do the same thing by simply opening a file in HyperSnap window, and saving it in a different format. How to convert all the files contained within a folder, if there are several hundreds of them? Here is the exact command syntax, without a lot of explanation:
for %f in (*.bmp) do start/wait "C:\Program Files\HyperSnap 4\HprSnap" -open "%f" -save:gif "%f"
The "for" command will cause the other command, listed after the "do" keyword, to be repeated for each file that matches the name pattern inside () parenthesis, *.bmp in the example above. The %f parameter will be each time replaced by the actual file name that matches that pattern. As an extra precaution I enclosed %f in double quotes "%f" - this would be necessary if some file name contained spaces in it.
For more information about HyperSnap command line options (like -open and -save above) read HyperSnap help file, the "Advanced - Command Line Parameters" section. For more information about MS-DOS batch language and commands (like the "for" and "start/wait" above) - read the documentation and on-line help that comes with Windows.